Kembali ke Blog
Ulasan Produk 2026-11-20 Argama Hobby - Gundam Model Kits & a Pro Build Space for ... 0 dilihat

G-Rework Decals for HG Gundam: Application Guide

G-Rework Decals for HG Gundam: Application Guide

Learn how to apply G-Rework waterslide decals to your HG Gundam kit for a clean, professional finish. Includes prep, tools, and tips for avoiding silvering.

Why Choose G-Rework Decals for Your HG Gundam?

G-Rework waterslide decals are a popular upgrade over standard stickers for Gundam model kits. They are thin, conform well to curved surfaces, and leave almost no visible edge when applied correctly. For HG kits, which often have limited color separation, decals add realistic panel lines, markings, and mechanical detail that elevate the finished look.

The G-Rework Decal for HG Mobile Suit Gundam GQuuuuuuX MS-09 Rick-Dom (GQ) is a high-quality set from Korea, specifically designed to fit that kit. While this guide uses that product as an example, the same application principles apply to any G-Rework decal set.

What Comes in the Set

  • G-Rework Decal - HG Mobile Suit Gundam GQuuuuuuX MS-09 Rick-Dom (GQ) Use: High quality and tastefully designed waterslide decal from Korea specifically designed for HG Mobile Suit Gundam GQuuuuuuX MS-09 Rick-Dom (GQ). Knowing the decal is waterslide and kit-specific helps you prepare the right tools (water, setting solution) and confirms the markings will align with the panel lines and surfaces of that model.
    G-Rework Decal - HG Mobile Suit Gundam GQuuuuuuX MS-09 Rick-Dom (GQ) Use
    G-Rework Decal - HG Mobile Suit Gundam GQuuuuuuX MS-09 Rick-Dom (GQ) Use

Step-by-Step Application Process

Applying waterslide decals requires patience and a clean workspace. The following steps assume you have a finished, painted (or bare plastic) HG kit with a smooth surface.

  1. Prepare the surface: Clean the area where the decal will go. Finger oils or dust prevent adhesion. A gloss clear coat before decals helps the decal slide into position and reduces silvering (trapped air under the film).
  2. Cut out the decal: Use a sharp hobby knife or scissors to cut close to the printed design. Leave a thin border of clear film around the marking so it does not lift during handling.
  3. Soak in warm water: Dip the decal in room-temperature or slightly warm water for a few seconds until it slides freely on its backing paper. Do not oversoak; the decal should remain on the paper until you are ready to transfer.
  4. Position the decal: Slide the decal onto the model using a damp brush or tweezers. Position it carefully—once the decal touches the surface, it is hard to move without tearing. Use a cotton swab or soft brush to nudge it into place.
  5. Remove excess water and air: Gently roll a damp cotton swab from the center of the decal outward to push out water and air bubbles. Blot, do not rub. If the decal wrinkles, add a drop of water and reposition.
  6. Seal the decal: After the decal dries completely (at least a few hours), apply a clear topcoat (gloss, semi-gloss, or matte) to protect the decal and blend it into the surrounding surface. This step is optional but recommended for durability.

Avoiding Silvering

Silvering happens when air gets trapped under the decal film, creating a silvery appearance. To prevent it: ensure the surface is smooth (a gloss coat helps), press out all water and air during application, and use a decal setting solution (like Mr. Mark Softer) that softens the decal and helps it conform to panel lines. G-Rework decals are thin, which reduces the risk, but proper surface prep is still essential.

What the Supplied Information Does Not Settle

The product record confirms the decal is waterslide and designed for the HG GQuuuuuuX MS-09 Rick-Dom (GQ). It does not specify the number of decals in the set, the sheet size, or whether the decals include markings for multiple variants (e.g., different unit numbers). For those details, check the packaging or manufacturer photos. The application steps above are general best practices for waterslide decals; always test on a scrap surface first if you are new to the technique.

Artikel Terkait

Customer Service
Beranda
Produk
Keranjang
Profil