Nendoroid 2810 Asuka Langley Shikinami: Care and Display Tips

Nendoroid 2810 Asuka Langley Shikinami: Care and Display Tips

By Argama Hobby - Gundam Model Kits & a Pro Build Space for ... | Published: 2026-11-04

Category: Consigli e cura

Keep your Nendoroid 2810 Asuka Langley Shikinami looking sharp with a simple routine for handling face plates, cleaning dust, and choosing a stable display spot.

Quick answer

Treat the face plates as the fragile part: change them only with clean, dry hands and gentle pressure, dust the figure monthly with a soft brush, and display it away from direct sun and heat.

Why face plates deserve their own routine

The Nendoroid 2810 Asuka Langley Shikinami includes three interchangeable faces, so most handling wear happens during swaps rather than during display. Repeatedly prying a face plate out by the chin or hair edges can loosen the fit over time, and oily fingers leave marks that are harder to remove later.

Set aside a clean, uncluttered surface before you start. Working over a table instead of a carpet means a dropped face plate is easier to find and less likely to pick up lint.

Display spots that protect the finish

Direct sunlight and nearby heat sources are the two conditions most likely to affect a displayed figure over months. A shelf away from a window and above floor level also reduces dust and accidental knocks.

The figure stands approximately 10 cm tall, so it fits on narrow shelves and desk edges, but that also makes it easy to bump. If you display it near a walkway, use the included base and keep the figure toward the back of the shelf.

When to skip a full cleaning

If the figure only has light surface dust, a soft brush is enough. Avoid washing the figure or soaking parts, and do not use alcohol or household cleaners on painted surfaces unless the manufacturer explicitly says otherwise, because the supplied catalog does not list a cleaning method.

Step-by-step care and display routine

  1. Wash and dry your hands before touching the figure: Use soap and water, then dry completely. Oils and lotion transfer to painted surfaces and face plates, and they attract dust. Keep a lint-free cloth nearby for quick wipe-downs.
  2. Swap face plates on a clean, flat surface: Support the head with one hand and ease the face plate out with gentle, even pressure. Do not pull by the hair or use fingernails to pry. If a face plate resists, stop and check that it is aligned rather than forcing it.
  3. Store unused faces separately: Place the two faces you are not displaying in a small lidded box or a divided tray. Keep them out of direct sun and away from loose metal or sharp tools. Label the container so you can find the blush, smile, or wink face without emptying it.
  4. Dust monthly with a soft brush: Use a clean, dry cosmetic brush or a soft camera brush. Brush downward over the head, then the body, and finish around the base. Do not blow on the figure; breath moisture and saliva can leave marks.
  5. Choose a stable display location: Place the figure on the included base on a shelf away from direct sunlight, radiators, and walkways. Keep it above floor level to reduce dust and bumps. Check the base is fully seated and the shelf is level before letting go.
  6. Do a quarterly condition check: Look for loose joints, dust buildup in the hair, and face plates that no longer sit flush. Address dust first, then re-seat any part that looks misaligned. If a joint feels loose, stop swapping parts until you can inspect it in good light.

Product facts

Shop Related Products

Good Smile Company Nendoroid 2810 - Evangelion: 2.0 You Can (Not) Advance - Shikinami Asuka Langley

Good Smile Company Nendoroid 2810 - Evangelion: 2.0 You Can (Not) Advance - Shikinami Asuka Langley

$32.97 $65.93

Shop Now