GodHand Ultimate Nipper Evangelion Unit-01 Ver.: What You Get
By Argama Hobby - Gundam Model Kits & a Pro Build Space for ... | Published: 2026-11-04
Category: Produktanmeldelser
A practical buying guide to the limited-edition GodHand GH-SPN-120 Ultimate Nipper Evangelion Unit-01 Ver., with decision rules, trade-offs, and fit guidance for Gunpla builders.
Quick answer
Buy the GodHand GH-SPN-120 Ultimate Nipper Evangelion Unit-01 Ver. if you want a limited-edition single-blade nipper with the same cutting ability as the standard GH-SPN-120 and you regularly clean up plastic gates on Gunpla. Skip it if you need to cut thick resin, clear parts over 1mm, or you prefer a budget nipper for rough first cuts.
What the limited edition actually changes
The Evangelion Unit-01 version is a cosmetic and collectible variation of the GH-SPN-120 Ultimate Nipper. The catalog states its cutting ability is the same as the existing GH-SPN-120, so you are not buying a different cutting geometry or a stronger blade. What you get is the NERV emblem and a dual-grip design, plus the limited-edition availability that made the original release sell out in 40 minutes ten years ago.
That distinction matters for your decision: if you already own a standard GH-SPN-120 and it cuts well, the Evangelion version is a display or collector purchase, not a performance upgrade. If you are buying your first Ultimate Nipper, the limited edition gives you the same cutting capability with a different look and grip.
Cutting limits you should respect
The supplied specification is specific: plastic (PS, PP, ABS, PE resin) up to 3mm diameter, and clear parts up to 1mm. Those numbers are the practical ceiling, not a target. Pushing a single-blade nipper beyond them risks damaging the edge or the part, and the catalog does not claim any additional capacity for this edition.
For most Gunpla gate cleanup, the 3mm plastic limit covers typical runners. The 1mm clear-part limit is the one to watch: clear runners and thick transparent gates need a different tool or a more careful approach. If clear parts are a big part of your builds, plan for a second nipper rather than relying on this one for everything.
Where the price and availability fit
The catalog price is USD 31.48 against a comparison price of USD 62.97. That gap is a genuine reason to consider this edition now rather than waiting, but it is also a reminder that limited-edition stock is not guaranteed. The original release sold out quickly, so treat availability as a real constraint rather than a marketing line.
The trade-off is that you are paying for a collectible finish and grip design on a tool with a known cutting ceiling. If you only need a reliable nipper for basic cleanup and do not care about the Evangelion styling, a standard nipper may be the more sensible spend. If you want the limited edition specifically, the current price is the strongest argument for acting.
Decision rules for buying this nipper
- If you cut standard plastic gates on Gunpla: Choose this nipper when your gates are PS, PP, ABS, or PE plastic and no thicker than 3mm. It is built for that job and the single-blade edge is intended for clean cleanup cuts. Check your runner material and gate thickness before ordering.
- If you work with clear parts: Do not use this nipper on clear parts thicker than 1mm. The catalog limit is 1mm for clear parts, so plan a separate tool or a different cutting method for thick clear gates. Clear-part builders should budget for a second nipper.
- If you already own a standard GH-SPN-120: Buy this only if you want the Evangelion Unit-01 styling, NERV emblem, and dual-grip design. The cutting ability is the same as the existing GH-SPN-120, so it is not a performance upgrade. Treat it as a collectible purchase, not a replacement for a working nipper.
- If you are deciding on price: At USD 31.48 against a USD 62.97 comparison price, the limited edition is easier to justify now. But if you do not value the Evangelion design, a standard nipper at a lower price may serve you just as well. Decide whether the limited styling is worth the spend before stock disappears.
Product facts
- GodHand GH-SPN-120 Ultimate Nipper Evangelion Unit-01 Ver. (Limited Edition): Cutting capability is plastic (PS, PP, ABS, PE resin) up to 3mm diameter and clear parts up to 1mm, with cutting ability the same as the existing GH-SPN-120. This tells you exactly which gates the nipper is designed for and where you need a different tool.
GodHand GH-SPN-120 Ultimate Nipper Evangelion Unit-01 Ver. (Limited Edition) - GodHand GH-SPN-120 Ultimate Nipper Evangelion Unit-01 Ver. (Limited Edition): The limited edition features the NERV emblem and a dual-grip design, and it sold out in 40 minutes when first released 10 years ago. The grip and emblem are the main differences from the standard version, and the sell-out history signals that stock may not last.
Who should buy it
Best for
- Gunpla builders who want a limited-edition single-blade nipper with Evangelion Unit-01 styling
- Builders who cut standard plastic gates up to 3mm and want a clean cleanup tool
- Collectors who missed the original release and want the NERV emblem and dual-grip design
Not for
- Builders who regularly cut clear parts thicker than 1mm
- Anyone who already owns a standard GH-SPN-120 and only needs cutting performance
- Shoppers looking for the lowest-cost nipper for rough first cuts
