Argama Hobby - Gundam Model Kits & a Pro Build Space for ...

Born Paint 029 - Finish Clear Color Black 30mL

Born Paint 029 - Finish Clear Color Black 30mL - Main image
$5.37 $10.74 In stock

Color: Black clear top coat for a plated look

This revolutionary clear color can be applied directly to plated-look paint, while maintaining the low-erosion performance that minimizes cloudiness of the delicate plated-look series. You can enjoy a wide variety of colors by mixing colors with the same color series.

★For more information on plated-look paint, please refer to the painting flow and HOW-TO video.

Conditions for Use

  • Recommended Tool: Airbrush
  • Dilution Ratio (Guideline): 10:3-5
  • Dilution Solvent: Finish Clear Thinner

Precautions for Use:

Due to its low solvent resistance, it is not recommended to apply a topcoat to the Low Corrosion Series. Allow the Plating-Look Series to dry thoroughly before applying any more. Rubbing too hard may cause the paint to come off. To strengthen the paint film, use a strengthener specifically designed for Finish Clear. Always use the dedicated thinner when diluting.

Volume: 30ml
Ingredients: Synthetic resin, pigment, organic solvent
Type: Lacquer
Use: Plating top coat paint
Recommended combinations: Primer - Plating-look series

*Color samples shown are from Bone Mirror.

Customer Reviews (4.2 / 5 · 5 reviews)

William ★★★★★

I was a little nervous a black clear coat would dull the chrome underneath, but this went on crystal clear and kept that plated look perfectly. The 30mL bottle is small, yet a little goes a long way, so one coating was all I needed.

Steven ★★★★★

The clouding issue has been my worst enemy with clears, so the low-erosion formula here genuinely impressed me—three coats over a chrome base and it stayed crystal clear. It lays down thin enough to keep that plated look sharp without any milky haze.

Harper ★★★★☆

The low-erosion formula really does keep the finish clear—I’ve layered it over a metallic base and it stayed glossy without frosting. Only gripe is the 30mL bottle runs out fast if you’re doing multiple parts.